2G networks were built mainly for voice services and slow data transmission.
From 2G to 2.5G
The first major step in the evolution to 3G occurred with the introduction of General Packet Radio Service (GPRS). So the cellular services combined with GPRS became '2.5G.'
GPRS could provide data rates from 56 kbit/s up to 114 kbit/s. It can be used for services such as Wireless Application Protocol (WAP) access, Multimedia Messaging Service (MMS), and for Internet communication services such as email and World Wide Web access. GPRS data transfer is typically charged per megabyte of traffic transferred, while data communication via traditional circuit switching is billed per minute of connection time, independent of whether the user actually is utilizing the capacity or is in an idle state.
From 2.5G to 2.75G (EDGE)
GPRS networks evolved to EDGE networks with the introduction of 8PSK encoding. Enhanced Data rates for GSM Evolution (EDGE), Enhanced GPRS (EGPRS), or IMT Single Carrier (IMT-SC) is a backward-compatible digital mobile phone technology that allows improved data transmission rates, as an extension on top of standard GSM. EDGE can be considered a 3G radio technology and is part of ITU's 3G definition, but is most frequently referred to as 2.75G. EDGE was deployed on GSM networks beginning in 2003—initially by Cingular (now AT&T) in the United States.
EDGE is standardized by 3GPP as part of the GSM family, and it is an upgrade that provides a potential three-fold increase in capacity of GSM/GPRS networks. The specification achieves higher data-rates by switching to more sophisticated methods of coding (8PSK), within existing GSM timeslots.
Evolution towards 4G
Both 3GPP and 3GPP2 are currently working on further extensions to 3G standards, named Long Term Evolution and Ultra Mobile Broadband, respectively. Being based on an all-IP network infrastructure and using advanced wireless technologies such as MIMO, these specifications already display features characteristic for IMT-Advanced (4G), the successor of 3G. However, falling short of the bandwidth requirements for 4G (which is 1 Gbit/s for stationary and 100 Mbit/s for mobile operation), these standards are classified as 3.9G or Pre-4G.
3GPP plans to meet the 4G goals with LTE Advanced, whereas Qualcomm has halted development of UMB in favour of the LTE family.Error! Hyperlink reference not valid.
Sunday, February 14, 2010
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment